Description:

The decontaminator is a kind of component widely used in petrochemical process pipeline. The first function is to prevent impurities in the pipeline medium from entering the transmission equipment or precision parts, so as to cause production failure or affect product quality. The decontaminator is installed on the main water supply pipe at the user's inlet, as well as the inlet of heat source (cold source), heating (cold) equipment, water pump and regulating valve. Its structure includes Y-type cleaner, cone-shaped cleaner, right angle cleaner and high-pressure cleaner. Its main materials are carbon steel, stainless acid resistant steel, manganese vanadium steel, cast iron and malleable cast iron. The internal filter screen has copper mesh and stainless acid resistant steel wire mesh.

Generally, the decontaminator shall be set in front of the inlet pressure regulating device of the heating system or the inlet of each equipment. The straight through type dirt remover is installed on the horizontal pipeline, and the angle type dirt remover can be installed on the right angle turning pipeline. The installation direction of the arrow on the shell must be consistent with the water flow direction. Regular blowdown shall be conducted during operation.

This separator can purify the water in system. The life and efficiency of a heating or cooling system are greatly dependent on the quality of the system water. Air and dirt problems cause frequent breakdowns and increased customer complaints. Corrosion, cavitation, and component wear are consequences of air-saturated, dirty system water. 

Structure:

According to the national standard drawing R406, the structure of the dirt remover can be divided into three types: horizontal straight through dirt remover, horizontal angle through dirt remover and vertical straight through dirt remover. The features of the cleaner are that the filter screen is improved from the galvanized wire mesh specified in the original standard drawing to a special stainless steel filter screen. In the decontamination device, the water flows into the cylinder from the water inlet, and the water filtered by the filter screen flows out from the water outlet, and the dirt settles at the bottom of the decontamination device and is discharged through blowdown.

Main Features:

1. Effective separates free gas, oil and water from well effluent

2. Precise measure for gas,oil and water

3. Uninterrupted production for maintenance and repairs

4. Designed with 1/8-in.corrosion allowance for extended vessel life

5. Safe for use in H2S environments

6. Longn operational life

7. Environmentally acceptable

8. Complied with API Spec. 12J, ASME VIII, Div. 1 or 2, NACE MR 0175

Product Application:

A three-phase separator can be horizontal, vertical or spherical. This type of separator is commonly used to remove any free water that can cause problems such as corrosion and formation of hydrates or tight emulsions, which are difficult to break. It can separate gas, oil and free water. The liquids that are discharged from the three phase separator are further treated in vessels called treaters.

Technical parameter:

Dirt Separator Characteristics:

1.Water throughout the device can protect system to greatest extent

2.Improved efficiency

3.Reduce the risk of system failure

4.Increased component life

5.Reduced oxygen-based corrosion and pump cavitation

6.Quiet operation

7.No bypass, isolating valves or replacement filters to clog and reduce pressure drop

8.Dirt can be flushed while system is operating

How to use Dirt Separator:

1. During normal operation, we need to open the inlet and outlet valves, close the drain valve.

2. Open the sewage drain valve until the outflow of clean water.

3. After completing the sewage , you can close the drain valve at the outlet.

4.When lack of sewage pressure, you can close the valve at the outlet.

5. You should pay attention to the direction of flow when installing the pipe.

6. Spare the operating space for operator. Since the device is without moving parts, that is, no need to maintenance equipment,

But you need to maintain a stable entry load, the drain valve opening and closing force uniform. Avoid man-made damage.

Dirt Separator Installation Notes:

1. The device must be installed horizontally, pay attention to the installation direction of the arrow, the arrow of direction is the direction of flow.

2. Since the device during operation with no moving parts, maintenance-free, so the design, installation, according to the actual site

Collocation.

3. equipment import and export pipelines, should be set up near the mouth of the pipe scaffold tube; directly connected with the container spout

Greater than or equal DN150 valve below the bracket should be set.

4 spiral decontamination and export are GB flange. Equipment intake and outlet valves are required to be installed.

About us:

Yancheng Longyan Machanical Equipment Co., Ltd.established for 10 years. It is located in the Qinnan town Yancheng city, at the exit of Yanxu Expressway. The total covering area is 8000 square meters and standard factory building is 3800 square meters.

The company is a professional foreign trade import and export company in the manufacturing industry. The company management has more than 10 years of machinery production experience. Contain 150 employees, 26 technical managements, 8 designers. And mainly producing industry electric air heating equipment, electric heating tubes, electric heating oil furnace, pipeline heaters, water treatment equipment, general mechanical equipment and paniting machinery. The products had exported to more than 10 countries in Europe, Southeast Asia, etc.

Contact us:

Tel：+86 15861939908

Email：brenda@china-longyan.com